Text Size

?:Blacktooth gantry inhibited by wiring/hoses

Official support for products purchased from the BuildYourTools.com and BuildYourCNC.com sites, and the book "Build Your Own CNC Machine (Technology in Action)" by Patrick Hood-Daniel and James Floyd Kelly.

?:Blacktooth gantry inhibited by wiring/hoses

Postby AnthonyTVA » Wed Aug 03, 2016 6:05 pm

I have been trying to tidy up the wires and hoses on the gantry of my Blacktooth, but they inhibit the movement of the gantry regardless of how I position them. They tend to want to lay across the timing belt running along the Y-axis rail. When I had them willy-nilly inside the enclosure, they did not impede movement. However, I feel like the potential is there for a stray wire or hose to get under the beam of the laser if left loose.

I would like to see pictures of how other blacktooth builders have dealt with this.
AnthonyTVA
 
Posts: 2
Joined: Wed Aug 03, 2016 3:51 pm
CNC Machine: BlackTooth

Return to Product Support (Build Your Tools / Build Your CNC)

Who is online

Users browsing this forum: No registered users and 3 guests

cron

Who is online

In total there are 3 users online :: 0 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 158 on Thu Mar 08, 2012 8:54 pm

Users browsing this forum: No registered users and 3 guests